Resources
View Our
Educational Resources
Read white papers, technical tips, how-tos, success stories, and watch webinars, of how we’ve achieved goals within the medical device and biotech industry. If there are any other topics that you would like to see in our our webinar/resources section, please do not hesitate to let us know (webinar@hanteltech.com).
We look forward to hearing from you!
Date: Oct 29, 2016
Title: Material Selection Matrix – Diafil. Unit, Sample Receiver Bottle, Rxn/Conjugation Chamber, & Material Selection Matrix – Stir Bar Overmolding
Created by:
Hantel Material Matrix (pdf)
Date: March 28, 2013
Title: Lipid-induced environmental stress cracking (ESC) in medical device components
Presented by: Julia Choi, Ph.D.
White Paper (pdf)
Date: February 28, 2013
Title: Hantel Tech Webinar Series – Introduction to custom compounding for the health care industry
Presented by: William Blasius, Foster Corporation
[Click here to view]
Date: March 28, 2013
Title: Hantel Tech Webinar Series – Considerations for medical adhesive joint design and plastics selection (Part 1)
Presented by: Kyle Eales, Henkel-Loctite
[Click to register]
Date: April 25, 2013
Title: Hantel Tech Webinar Series – Adhesive technology and curing systems
Presented by: Margo Martin and Gary Zubricky, Dymax
[Click to register]
Date: May 16, 2013
Title: Hantel Tech Webinar Series – Medical adhesive technology review (Part 2)
Presented by: Kyle Eales, Henkel-Loctite
[Click to register]
Date: June 27, 2013
Title: Society of Plastics Engineers, Golden Gate Section – Capabilities for medical device design and manufacturing at Plastikon/Hantel (Seminar and Tour)
Organized by: Jennifer Hoffman, Society of Plastics Engineers
[Click to register]
Date: October 25, 2012
Title: Hantel Tech Seminar Series – Freedom-to-Operate, Competitive Intelligence, and Using Your Competitor’s Intellectual Property Information to Advance Your Position
Presented by: Erik Milch and John Mills, Cooley LLP
[Click here to view]
Date: September 27, 2012
Title: Hantel Tech Webinar Series – Real Parts, Really Fast in the Medical Industry
Presented by: Ashley Moore, Protolabs
[Click here to view]
Date: August 30, 2012
Title: Hantel Tech Webinar Series – An introduction to plastic component failure analysis
Presented by: Jeffrey Jansen, The Madison Group
[Click here to view]
Date: June 28, 2012
Title: Hantel Tech Webinar Series – Some Surprising Things About Innovation in Medical Device Development
Presented by: Ted Kucklick, Cannuflow
[Click here to view]
Date: May 31, 2012
Title: Hantel Tech Seminar Series – Overview of Medical Device Safety in California
Presented by: Lilly Chin, California Department of Public Health, Food and Drug Branch
Please note that this particular event will not be made available online, but resources will be uploaded in the future.
[Click here for information about event]
Date: May 3, 2012
Title: Hantel Tech Webinar Series – 3D Printing for the Rapid Product Development of Medical Devices
Presented by: Dylan Oliver and Rich Stump, Kemeera
[Click here to view]
Date: April 5, 2012
Title: Hantel Tech Webinar Series – Integrating Market Research into the Product Development Process
Presented by: Barry Zakar, Intellimed Consulting
[Click here to view]
Date: February 23, 2012
Title: Hantel Tech Webinar Series – Plastic Injection Molding Analysis with Autodesk Moldflow – Sponsored by EMA Design Automation
Presented by: Matthew Jaworski, Autodesk, Inc.
[Click here to view]
Date: January 26, 2012
Title: Hantel Tech Webinar Series – Plasma Surface Modification for the Life Science Industry
Presented by: Mikki Larner, Plasma Technology Systems
[Click here to view]
Date: October 27, 2011
Title: Hantel Tech Webinar Series – Navigating the New Risks and Rewards of the America Invents Act for Start-ups and Entrepreneurs
Presented by: Brian Eller, J.D., NCSU
[Click here to view]
Date: September 29, 2011
Title: Hantel Tech Webinar Series – The Use of Nitinol in Medical Devices
Presented by: Louis Malito, NDC
[Click here to view]
Date: November 19, 2009
Topic: From Concept to Clinical Practice: Selecting Animal Models
Presented by: Dr. Jabir Akhtar
Company: Hantel
[click here to view]
Date: October 15, 2009
Topic: Ethylene Oxide Sterilization: History, validation requirements, comparison to other methods, and advantages/disadvantages.
Presented by: Denny Christensen
Company:D2EO
[click here to view]
Date: September 24, 2009
Topic: Dimensioning and Tolerancing
Presented by: Marc Spinali
Company: Hantel
[click here to view]
Date: August 20, 2009
Topic: Shipping/Packaging Validation
Presented by: Pal Khangaldy and Mark Escobedo
Company: Westpak
[click here to view]
Date: March 26, 2008
Topic: In-House Technology Workshop amp; Adhesive/Sealant Survey
Presented by: Frank Schweininger
Company: Loctite
[click here to view]
Date: February 27,2008
Topic: Radiation Sterilization Validation
Presented by: Larry Nichols
Company: Nutek
[click here to view]
Date: November 28, 2007
Topic: Injection Molded Part Design
Presented by: Mike McCarthy
Company: Hantel
[click here to view]